iFlight Nazgul5 V2 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP RaceCam R1 Cam BLITZ F7 E45S 45A ESC 2207 1800KV Motor

(18 customer reviews)

5 in stock


– 5mm arm design for more durability

– Easy-Swap arms

– LED illuminated Logo

– XING-E 2207 motors and NAZGUL 5140 props
– 5″ version also fits 5.1″ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks


Item will be shipped in 1-2 business days
  Ask a Question

New Version Upgrade in BLITZ F7 V1.1 Flight Controller and BLITZ E45S 4in1 ESC

New Version Old Version
BLITZ F7 V1.1 Flight Controller  ( Separate FC Link)

MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g


SucceX-E F7 Flight controller


– MCU: STM32F22RET6 216MHz

– Gyro: MPU6000


– BEC: 5V 2.5A

– BlackBox: 16MB


– 4×Dshot/PWM outputs

– Smartaudio & IRC Tramp VTX protocol supported

– WS2812 led Strip: Yes

– Bepper: Yes


– Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

– Weight: 6.9g

BLITZ E45S 4in1 ESC ( separate ESC Version to know more details )

Input oltage: 2-6S

Firmware: QH-40 16.7

Continuous current: 45A

Instantaneous current: 55A


Current sensor: yes scale 200

Drive signal support: DShot150/300/600MultiShot.OneShot

Weight: 15g


SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

– Dimension: 40*43mm

– Mounting Holes: 30.5*30.5mm/Φ3mm

– Weight: 14.4g

– Supports 2-6S Lipo input

– STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

– Current sensor: YES


– Supports: DShot150/300/600/1200/MultiShot/OneShot etc.

– Target: G-H-30 BLS 16.7


Before Caddx Ratel camera changed to RaceCam R1 Mini Cam.

 ( RaceCam R1 is the same as the Caddx Ratel camera, but changed the brand LOGO )

Frame Spare Part , Click Here


Nazgul5 V2 is a 5′ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


  • BLITZ F7  BLITZ E45S 45A flight stack
  • XING-E 2207 FPV Motor (6S 1800KV )
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

SucceX Force 5.8g 800mW VTX Adjustable

– Item: SucceX-Force 800mW adjustable VTX

– Input voltage:

– Output voltage/ Max current: 5V 1A

– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@500mW, 380mA@800mW

– Output 48 frequency points, 

– size:36*36*3mm

– PIT/25mW/200mW/400mW/800mW


– 5mm arm design for more durability

– Easy-Swap arms

– LED illuminated Logo

– XING-E 2207 motors and NAZGUL 5140 props
– 5′ version also fits 5.1′ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks

Package Included:

  • 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
  • 1x RaceCam R1, 2.1mm lens 19x19mm camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional Suggested Parts (Not Included)

  • Battery 6S 1300mAh
  • Camera mount for GoPro
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

4.75 out of 5
SKU: 6900952761506 Category: Tags: , , ,
Weight 0.78 kg

Without Receiver, ELRS 2.4GHz, Frsky RXSR Receiver, TBS Crossfire Nano RX


ID: 1730610

Based on 18 reviews

5.0 overall

Add a review

  1. Saul

    The goods arrived intact. build quality at altitude. A little embarrassed by the mounting of the crossfire antenna, let’s fly to see.


  2. Kaluuya

    Really happy with this quad good quality build. Got it with the Xm+ and had to reflash the receiver to get it to work witch is a pain. would highly recommend the iflight V2 tho.


  3. Boult

    Good quality freestyle quad for 6S limo. 400g without battery, good motors, good setting. Now ist the frame durability better and a good VTX with Caddx ratel camera.


  4. Fleming

    Although it is a member of the previous generation compared to Evoque (with some facelift), it is still one of the best 5 inch drones in the BNF category. Precise assembly, demanding design components, pre-defined. I only have two points: I prefer to fix the battery with two velcros – I have had a drone that I have left the battery on the way, because that’s when the Velcro went off. I mean, it feels more stable when it’s got a double grip. The other is the crossfire antenna, the end, unfortunately, can get over the arms and, unfortunately, the engine rotor frictions right to the end.


  5. Neesham

    Got it, thank you! I’m going to test and check! Order came quickly. of high quality packaging


  6. Watling

    The seller is really good!!!! Shipped quickly, without customs and delays at customs! The box is slightly dented, but the contents are fine!


  7. Mills

    Very good drone, quite sturdy and very funny. It didn’t come with the propellers from the photos but the ones that came were the same but of a different color. Camera’s decent. The catch I put is that if you put the antennas of the receiver with the little black tubes up when you hit it they’ll break for sure but well it’s easy to solve by putting them in another way.


  8. Boyega

    💯this is the best bind and fly drone I have ever got flyers great with tune already and I have changed tune a small bit and flyers even better I will be buying another iflight drone next week highly recommend I have got a lot of flight time with no issues 👍


  9. Rakitić

    Good quality of finishes and components that this magnificent nazgul has, in the absence of configuring it and testing it in flight the first impression is very good.


  10. Arturo

    I arrive with a blow but short of testing the flight all correct turns on. Looking forward to giving my first flight.


  11. Astle

    Great drone! Just need to configure the receiver, set modes and rates, default pid good (for use without Gopro on!), flies very smoothly. Very happy! (Gopro mount 3d printed by me, but package includes a standard base mount)


  12. Chris Cairns

    Good drone, excellent workmanship. Unfortunately not yet tried but it promises well. The only negative point the TPU prints too thin, are to be redone to have greater protection to the engines

    Chris Cairns

  13. Vettori

    spectacular drone!!! do not waste time to build them, buy this iFlight because and crazy!!! many spare parts, including 8 propellers. arrived in 10 days. I recommend the purchase!


  14. Chilwell

    beautiful, and remarkable quality of materials, arrived a day before, only flaw is that the package was opened as pictured, I have to understand if something is missing.


  15. Wright

    A very good drone and I recommend it to everyone


  16. Cairns

    very fast to Chile, looks perfect, just I need to practice, it’s my first Drone and is FPV, because I love challenges!


  17. Mo

    Got it! I have to wait until rain stops to get first flight. Easy bind with TBS NANO RX. Shipping to Poland takes 3 weekes. Its second time when Im ordering from iFlight store and always its perfect.


  18. Thiago

    Great quality for the price. Great soldering, and generally very well put together. Mine did come with the gopro base mount.


No more offers for this product!

General Inquiries

There are no inquiries yet.