Hitbox Controller Fight Stick Game Mechanical Button Arcade Joystick Built-in LED For PC/PS4/PS3/PC/ Switch

Performance

Input latency is tested using the methodology outlined at WydD’s inputlag.science website, using the default 1000 Hz (1 ms) polling rate in the firmware.

buttons to the supported input types and layouts:
If you do not have a dedicated Home button, you can activate it via the SELECT + START + UP button combination.

Bootsel Mode

Bootsel Mode is the state of the board where firmware can be flashed onto the board. You will need to use this whenever there is an update or as part of the troubleshooting process.
You can boot into Bootsel Mode by either holding S1 + S2 + UP buttons while plugging in the controller or by booting into the Web Configurator and then restarting in Bootsel Mode.

Webconfig Mode

Webconfig Mode is the state of the board where built-in web browser-based configuration application is launched. From here, you can customize and configure your controller as needed.
You can boot into Webconfig Mode by holding the S2（START） button while plugging in the controller.

SOCD Modes

Simultaneous Opposite Cardinal Direction (SOCD) cleaning will ensure the controller doesn’t send invalid directional inputs to the computer/console, like Left + Right at the same time. There are 3 modes to choose from while the controller is in use by pressing one of the following combinations:
START + GUIDE + UP – Up Priority mode: Up + Down = Up, Left + Right = Neutral (Hitbox behavior)
START + GUIDE + DOWN – Neutral mode: Up + Down = Neutral, Left + Right = Neutral
START + GUIDE + LEFT – Last Input Priority (Last Win): Hold Up then hold Down = Down, then release and re-press Up = Up. Applies to both axes.
SOCD mode is saved across power cycles

Hotkeys

A number of useful hotkeys exist that change the functionality of SKY2040 without needing to access the Web Configurator. Commonly used hotkeys include changing the directions to emulate a digital DPad, Left Analog Stick, Right Analog Stick or to change Simultaneous Opposite Cardinal Direction (SOCD) cleaning modes. Different SOCD cleaning modes will ensure the controller obeys certain directional input rules when sending inputs to the computer or game console.
A number of hotkeys are enabled by default and if you are encountering issues with unexpected behavior on your controller, verify that you did not accidentally trigger a hotkey.