Sweetmile Concentrating Solar Cooktops 1000-1500W Environmental-friendly Outdoor Portable Solar Cooker Stoves

Fast cooking without power! Our concentrating solar cooker can provide you with heat quickly and cook food more healthily and harmlessly than other stoves. As long as there is the sun, it can provide you with efficient and delicious food.

Key Features

Environmental-friendly: It uses sunlight to gather heat, and does not need coal, electricity, liquefied gas, firewood, etc. It not only solves the fuel problem, but also can greatly reduce burning, and has no pollution to the environment.

High Efficiency: It converts the gathered solar energy into heat energy instantly. Its temperature can be as high as 1472-1832°F in a flash, providing you with up to 1500W of thermal power, enabling it to boil 1kg of water in 6 to 8 minutes, saving you time.

Money-saving & Labor-saving: It can be used where there is sunshine, which is convenient and economical.

Convenient to Use: Not only has it reached the temperature equivalent to the kitchen oven, but you can also control the heat generated by adjusting the size of the light spot to obtain more perfect and delicious food!

User-friendly: Using this concentrating solar cooker means that there will not be toxic smoke blowing on your face when you prepare food. In addition, you don’t need to worry about accidentally eating food with soot or ashes like using charcoal.

Effortless Cleaning: Due to its smooth surface, you only need to use soapy water and a piece of cloth to wipe off the grease generated during cooking on the solar cooker.

Premium Quality:The concentrating solar cooker is made of high-quality iron, with good toughness, water resistance, and corrosion resistance, it can be used for a long time. The converging reflector with aluminum film has a good reflection effect, and is not easy to deform, age, or discolor.

Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

Details

Stable Support: The stable triangular and cross structure provide you with more comfortable cooking conditions.

Spray Plastic Treatment: The surface of the iron frame is sprayed with plastic to enhance its waterproof and corrosion resistance, to adapt to all kinds of bad weather.

Wheels: The three wheels at the bottom help you to move it easily.

Application

It is suitable for families, schools, factories and mines, roads, railways and other road sections, train stations, geological exploration, on-site operations, tourism, and picnics, as well as cooking, boiling water supply, and heating in the catering industry. It is also a powerful assistant for street food stalls.

How to Use

1. Select a flat ground, carry the six light collecting plates downward into a circle, and then use M6X 15 round-head screws to form a whole of the six light collecting plates, and tighten the screws. (The screw holes on the third circle from the inside to the outside are used to fix the square tube ring. Do not screw in the screws at this time) Note! The reflective film of the light-collecting plate must be protected during assembly.

2. Fix the square tube ring on the light collecting plate with MSx 15 screws, make sure that the square tube ring and the light collecting plate are in close contact during trapping, and tighten the screws.

3. Place the base on flat ground, screw the casing into the screw hole in the center of the base, and screw it well.

4. Loosen the handle on the sleeve and poke the side of the cross with a long hole into the sleeve.

5. Two people picked up the light collecting plate and installed it on the cross and fixed it with cotter pins. (Attention! The end with the sliding rod adjustment device must be upward)

6. One end of the sliding rod without a hole is inserted into the long hole on the square tube circle, and the other end is inserted into the long hole of the cross, fixed with M8x35 screws, and then the nut is adjusted while the light-collecting plate is moved up and down to make it properly tightened.

7. Insert the elbow into the upper hole of the cross and fix it with M6x 35 screws together with the support rod.

8. Install the other end of the cooker ring and support rod and fix them with screws.

9. While turning the light collecting plate left and right, adjust the handle on the base sleeve to make it properly tightened.

10. Place the solar cooker in a place where the wind will not affect the lighting, and fix the base. At this time, the solar cooker has been assembled.

Specifications

Color: Silver

Material: Iron

Surface Treatment: Spray Plastic Treatment, Aluminum Film

Fuel Type: Solar Energy

Thermal Power: 1000-1500W

Focal Spot Temperature: 800-1000°C/ 1472-1832°F

Stove Circle Diameter: 25.5cm/ 10.03in

Support Height: 115cm/ 45.27in

Solar Cooker Diameter: 150cm/ 59.05in

Package Size: 80*80*12cm/ 31.5*31.5*4.72in

Net Weight: 15kg/ 33.07lbs

Package Included

1* Concentrating Solar Cooker

3* Wheels

1* Chinese Instruction Manual

All Needed Accessories

Notes

1. Please note that this product will rise to high temperatures rapidly within a period, so do not test the site temperature with your hands or human body to avoid burns.

2. Please note that the performance of this product depends on the weather. It is recommended to use it on sunny days.

3. When using the solar cooker, first put the cardboard or wooden board on the cooker circle, adjust the cooker surface, and make its focal spot in the center of the cooker circle.

4. In the process of use, the tracking adjustment is generally carried out every 5-10 minutes to make the light spot always fall on the bottom of the pot. The energy density of the light spot is high, so it is better to operate on the back of the light collecting plate when adjusting.

5. Keeping the reflective surface clean often not only can prolong the service life but also can avoid the reduction of the effective cover. Wipe it with a wet and soft cotton cloth or wash it with water. Do not clean hard objects or particles to avoid damaging the reflective film.

6. When not in use, it is best to keep the stove surface away from the sun or inflammable.

7. The bottom of the new cooker should be blackened (blackened with grass) to improve the heat absorption capacity. Empty pots should not be placed on the stove to avoid burning the bottom,

8. The rotating part of the solar cooker should be lubricated regularly to make its operation convenient and flexible.

9. If the reflective film is partially damaged, use the spare film to make up in time.

10. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.